Briner - Liquid sprayers | Bucher Municipal

Briner

Universally usable and
optimal for preventive gritting

Briner CL

Universally usable for preventive gritting

Liquid automatons with different container designs.

CL_Largesize_brinesprayer

Briner de-icing liquid sprayer for heavy trucks, able to spread different liquid solutions. Symmetrical and asymmetrical spraying possibility. Manufactured in recyclable polyethylene modular tanks.

Modular tanks in rotational recyclable polyethylene constructed to produce a solid structure, whilst still maintaining flexibility to allow the item to be assembled on the vehicles.
Chassis without limiting its elasticity.

The low center of gravity and the presence of breakwater inside the single tanks enable a safe drive in any loading condition, also in rough circuits.

Get to know the Briner 

Technology
Technology and drive systems
Technology and drive systems

HYDRAULIC: Drive by hydraulic system of the vehicle whose characteristics must comply with European standards EN15431.

ENGINE: Driven by a liquid-cooled twin-cylinder diesel engine.

Reliability
Laser technology welding
Laser technology welding

Centrifugal pump made of AISI 316 stainless steel with laser technology welding according to EN733 (DIN24255), located in the back compartment, driven by a hydraulic piston motor or directly by an auxiliary motor (if present).

Painting cycle with sandblasting guaranteed 2000h in salt spray. These features simplify maintenance and reduce costs.

Electrical and hydraulic compartment concentrated in a compartment above the spreading unit and protected by a steel cover.

Safety
All safety devices
All safety devices

Electronic sensors signal, by signals on the control panel, malfunctions of the equipment or exhaustion of the material to be spread.

Safety and road traffic signs of various models including lights and protections according to the various requirements and regulations.

On request: handrails for safe access above the hopper, deposit systems with various types of unloading feet, interfaces for data downloading and connections to PC and others.

 

Key specifications

  • Centrifugal pump
    Stainless steel
  • CE Marking
    Conforms to Directives
  • Quality
    ISO 9001:2008 standard
  • Painting
    Higher resistance and lower maintenance costs
  • Configurations
    Versatile possibilities according to requirements
  • Tanks
    Modular

Key features

Modular tanks
Spreading system
Protected technical compartment
Water flushing device
Demount system

Modular tanks

Manufactured in recyclable polyethylene constructed to produce a solid structure, whilst still maintaining a flexibility to allow the item to be assembled on the vehicles chassis without limiting its elasticity. The low center of gravity and the presence of breakwater inside the single tanks enable a safe drive in any loading condition, also in rough circuits. Capacity: 2 m2 /each. Option for XL tank with higher capacity of 2.5 m3 each.

Spreading system

Nine spraying ramps (three on the right, three on the left, and three in the center) consisting of twenty-seven nozzles controlled by electrovalves, which regulate the spraying therefore reaching a max. length of 10.5 m (symmetrical/ asymmetrical spraying with steps of 3.5 m) .

Protected technical compartment

AISI 304 stainless steel rear hood to protect the technical compartment (all the valves, pump, electric and electronic components and Diesel engine, if present). The rear hood opens by means of gas cylinders for easy access.

Water flushing device

  • Movable front bar for roads washing:
  • Spraying width up to 2400 mm (alternatively telescopic width adjustment 2400 – 3600 mm)
  • Spraying pressure up to 40 bar (alternatively max pressure 120 bar)
  • Assembly on the vehicle front plate
  • Drive through vehicle hydraulic installation
  • Fed from the CL spreader tanks.

Demount system

  • Demount system P1: Demount system with galvanized telescopic feet with crank. Higher front feet for easy loading onto vehicles provided with side panels.
  • Demount system P3: Automatic demount system for tipper, with front rollers and feet fitting into the spreader. Unloading can be done automatically from the driver’s cab.
  • Demount system P4: Demount system for hook-lift complete of slide, protection guard for the vehicle platform and adjustable height rear rollers.

 

Other spreaders

Discover Bucher Municipal

Find out why Bucher Municipal is the perfect partner for you. 

Why Bucher Municipal

The partner you can always rely on to help you achieve more

Get to know more
Maintenance & Repair

Maintaining your vehicle in roadworthy conditions

Read more
Spare Parts & Accessories

Genuine parts to ensure reliability

Genuine parts to ensure reliability
Sustainability

Clear the way for a cleaner tomorrow

Read more
Bucher Connect

All-inclusive digital fleet management

Get to know more

Buy our products
and services

Providing products and services
around the world.

Buy Products and services